Sign In | Join Free | My vivirlatino.com
vivirlatino.com
Shenzhen Xinchenger Electronic Co.,Ltd
Shenzhen Xinchenger Electronic Co.,Ltd Printed Circuit Board Manufacturer Multilayer&High Frequency PCB Blind Buried Vias Hole
Home > Taconic PCB >

4 Layer Microwave Copper Clad Laminate Taconic PCB Used In LNAs , LNBs , PCS / PCN Antenna System

Shenzhen Xinchenger Electronic Co.,Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

4 Layer Microwave Copper Clad Laminate Taconic PCB Used In LNAs , LNBs , PCS / PCN Antenna System

Brand Name : XCE
Model Number : XCEM
Certification : CE,ROHS, FCC,ISO9008,SGS,UL
Place of Origin : China
MOQ : 1pcs
Price : negotiation
Payment Terms : T/T,Western union
Supply Ability : 1, 000, 000 PCS / week
Delivery Time : 5-10 days
Packaging Details : inner: vacuum-packed bubble bag outer: carton box
Material : Taconic
Layer : 4
Color : White
Min line space : 5mil
Min line width : 5mil
Copper thickness : 1OZ
Board size : 65*120mm
Panel : 1
Surface : ENIG
Contact Now

4 Layer Microwave Copper Clad Laminate Taconic PCB Used In LNAs , LNBs , PCS / PCN Antenna System



Quick detail:

Origin:ChinaSpecial: Taconic material
Layer:4Thickness:0.79mm
Surface: ENIGHole:0.8



Specification:
High Speed Design Frequency PCB Board TACONIC high-performance insulating material for microwave, radio frequency (RF) and high-speed digital signal processing (DSP) market with PTFE/type woven glass fiber fabric sheet.This material can be applied to LNAs LNBs, PCS/PCN antenna system, global positioning system (GPS) and UMTS antenna system,And the power amplifier, passive components, collision avoidance radar system, aviation help guide remote control technology and system of the phased array radar.
Taconic materials are UL 94V-0 rated for active devices and high power RF designs.

High Speed Design Frequency PCB Board Special high electromagnetic frequency circuit boards, in general, can be defined as the frequency of the high frequency of 1GHz. Its physical properties, precision, technical parameters required is very high, commonly used in automotive anti-collision systems, satellite systems, radio systems, etc.

The basic characteristics of a high frequency board material requirements are the following:
(1) dielectric constant (Dk) must be small and very stable, usually the smaller the better signal transfer rate and the dielectric constant of the material
Inversely proportional to the square root of high dielectric constant is likely to cause the signal propagation delay.
(2) the dielectric loss (Df) must be small, mainly affect the quality, the smaller the dielectric loss signal transmission of the signal loss is smaller.
(3) as far as possible consistent with the coefficient of thermal expansion of the copper foil, copper foil separated because of inconsistency will cause changes in the hot and cold.
(4) to low water absorption, high water absorption will affect the dielectric constant and dielectric loss when damp.
(5) Other heat resistance, chemical resistance, impact strength, peel strength, etc. must also be good.


Typical Applications

  • Cellular Base Station Antennas and Power Amplifiers
  • Microwave point to point (P2P) links
  • Automotive Radar and Sensors
  • low dielectric loss
  • RF Identification (RFID) Tags
  • The stability of the dielectric constant
  • An extremely low water imbibition
  • LNB’s for Direct Broadcast Satellites


Microwave Antenna 4 Layer PCB Board,Radio frequency (RF) and microwave PCB’s are a type of PCB designed to operate on signals in the megahertz to gigahertz frequency ranges (medium frequency to extremely high frequency). These frequency ranges are used for communication signals in everything from cellphones to military radars. The materials used to construct these PCB’s are advanced composites with very specific characteristics for dielectric constant (Er), loss tangent, and CTE (co-efficient of thermal expansion).
High frequency circuit materials with a low stable Er and loss tangent allow for high speed signals to travel through the PCB with less impedance than standard FR-4 PCB materials. These materials can be mixed in the same Stack-Up for optimal performance and economics.


Parameter:

oItemData
1Layer:1 to 24 layers
2Material type:FR-4, CEM-1, CEM-3, High TG, FR4 Halogen Free, Rogers
3Board thickness:0.20mm to 3.4mm
4Copper thickness:0.5 OZ to 4 OZ
5Copper thickness in hole:>25.0 um (>1mil)
6Max. Board Size:(580mm×1200mm)
7Min. Drilled Hole Size:4mil(0.1mm)
8Min. Line Width:3mil (0.075mm)
9Min. Line Spacing:3mil (0.075mm)
10Surface finishing:HASL / HASL lead free, HAL, Chemical tin, Chemical Gold, Immersion Silver/Gold, OSP, Gold plating
11Solder Mask Color:Green/Yellow/Black/White/Red/Blue
12Shape tolerance:±0.13
13Hole tolerance:PTH: ±0.076 NPTH: ±0.05
14Package:Inner packing: Vacuum packing / Plastic bag,Outer packing: Standard carton packing
15Certificate:UL,SGS,ISO 9001:2008
16Special requirements:Buried and blind vias+controlled impedance +BGA
17Profiling:Punching, Routing, V-CUT, Beveling



Features


• High Thermal Performance
 Tg: 180°C (DSC)
 Td: 340°C (TGA @ 5% wt loss)
 Low CTE for reliability
• T260: 60 minutes
• T288: 30 minutes
• RoHS Compliant
• UV Blocking and AOI Fluorescence
 High throughput and accuracy during PCB
fabrication and assembly
• Superior Processing
 Closest to conventional FR-4 processing
• Core Material Standard Availability
 Thickness: 0.002″ (0.05 mm) to 0.125″
(3.2 mm)
 Available in full size sheet or panel form
• Prepreg Standard Availability
 Roll or panel form
 Tooling of prepreg panels available
• Copper Foil Type Availability
 Standard HTE Grade 3
 RTF (Reverse Treat Foil)
• Copper Weights
 ½, 1 and 2 oz (18, 35 and 70 μm) available
 Heavier copper available upon request
 Thinner copper foil available upon request
• Glass Fabric Availability
 Standard E-glass
 Square weave glass fabric available
 Spread glass fabric available
• Industry Approvals
 IPC-4101C /21 /24 /26 /97 /98 /99 /101 /126
 UL - File Number E41625 as PCL-FR-370HR
 Qualified to UL's MCIL Program


Rogers material in stock:


BrandModelThickness(mm)DK(ER)
F4BF4B0.382.2
F4B0.552.23
F4B0.225,0.3,0.5,08,1,1.2,1.5,2,2.5,3.02.65
F4Bk0.8,1.52.65
F4B0.83.5
FE=F4BM12.2
RogersRO40030.254 0.508,0.813,1.5243.38
RO43500.254 0.508,0.762,1.5243.5
RO58800.254.0.508.0.7622.2
RO30030.127,0.508,0.762,1.5243
RO30100.63510.2
RO32060.635MM10.2
R030350.508MM3.5
RO60100.635MM, 1,27MM10.2


Product Tags:

pcb printed circuit board

      

quick turn PCB

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

4 Layer Microwave Copper Clad Laminate Taconic PCB Used In LNAs , LNBs , PCS / PCN Antenna System Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Shenzhen Xinchenger Electronic Co.,Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0